SKB Cases

SKB Cases | 3U 9” iSeries Injection Molded Fly Rack Case | 3i-2011M103U Shallow Fly Rack frames are 9" deep from rail to rail, providing a great solution for shallow recording interfaces, video switchers, or wireless microphone receivers. All Shallow Fly Rack cases feature TSA locking latches and a pull out handle/wheels for easy towing, as well as a pocket below each of the racks for cables and additional accessories.The SKB injection molded waterproof Fly Rack Cases are lighter in weight and...

SKB Cases | 3U 20” iSeries Injection Molded Fly Rack Case | 3i-2424M103U Shallow Fly Rack frames are 20" deep from rail to rail, providing a great solution for shallow recording interfaces, video switchers, or wireless microphone receivers. All Shallow Fly Rack cases feature TSA locking latches and a pull out handle/wheels for easy towing, as well as a pocket below each of the racks for cables and additional accessories.The SKB injection molded waterproof Fly Rack Cases are lighter in weight...

SKB Cases | 4U 9” iSeries Injection Molded Fly Rack Case | 3i-2213M124U The SKB injection molded waterproof Fly Rack Cases are lighter in weight and more affordable than previous models, all without compromising strength or durability. Rack frames are removable and fit easily into SKB's iSeries cases, where they are protected by high quality polyethylene (PE) foam that provides space for protruding knobs and buttons. At less than half the weight of standard shock racks, SKB Fly Racks feature...

SKB Cases | 6U 20” iSeries Injection Molded Fly Rack Case | 3i-2424M146U Shallow Fly Rack frames are 20" deep from rail to rail, providing a great solution for shallow recording interfaces, video switchers, or wireless microphone receivers. All Shallow Fly Rack cases feature TSA locking latches and a pull out handle/wheels for easy towing, as well as a pocket below each of the racks for cables and additional accessories.The SKB injection molded waterproof Fly Rack Cases are lighter in weight...

SKB Cases | 4U iSeries Injection Molded Guitar FX Fly Rack Case | 3i-231714GFX The 3i-231714GFX 4U Guitar FX Fly Rack allows for transport of both guitar processor rack equipment and a foot controller all in the same case. This case was designed specifically for the Kemper Profiler and Line 6 Helix rackmount processors and foot controllers. The top tray features robust ABS plastic and high density foam, with precut holes to perfectly match the foot controller feet and prevent movement or...

SKB Cases | 3R Series Caster Kit | 3SKB-CAST1 Caster plate and wheel kit for 3R Series cases that do not come equipped with built-in pull handle and wheels. The maximum weight capacity for these castors is 500 lbs.

SKB Cases | ATA Short Double Rifle Case 2SKB-4009The 2SKB-4009 ATA Short Double Rifle Transport is made for ATA 300 Category 1 specifications, ensuring the products ability to withstand 100 trips by air,the highest shipping container specification of the ATA. Capable of accommodating two rifles with SKB's trademarked "bunk bed" storage system with foam dividers that provide a separate compartment to protect two rifles.

Mid-sized Hardware Case The SKB-DH3315W provides the quality protection you need to protect valuable gear. Priding ourselves on listening to customers, and traveling around the country, the desire for a good-quality, hard-shell case with these dimensions became a common request. We've listened and responded with a case that is competitively priced, yet offers superior protection to soft tote bags, or semi-lined soft bags.Features Convenient pull-out handle Built-in wheels for easy transport...

SKB Gig Rig The SKB Gig Rig series has set the standard for mixer/rack cases for more than 15 years. The 4th Generation Gig Rig raises the bar yet again. Based on the 1SKB19-R1406 Mighty Gig Rig design, the 1SKB19-R1208 Gig Rig provides more versatility than previous generation Gig Rigs. Roto-molded of Linear Low Density Polyethylene (LLDPE), the 1SKB19-R1208 Gig Rig has a uni-body construction that is extremely durable. The 7? angled top steel rails are 12U rack spaces with extra room in the...

SKB The Mighty '07 GigRig The Mighty GigRig Rolling Rack System features a deep design (14U+) which allows for deeper analog and digital mixers (Yamaha 01V96, Allen & Heath Mix Wizard, Mackie Onyx, etc.). The deep design allows for rack gear to be mounted on the 6U front rack rails and additional rack gear mounted on optional 6U rear rack rails for a total of 12 rack units on the bottom. The cover is designed to be used as a stand for the GigRig and places the mixer at proper mixing height...

SKB The Mighty GigRig Expander The new SKB-REX6 Expander Rack gives added rack space to the SKB19-R1406 Mighty GigRig. The SKB-REX6, 6U Expander Rack Case features a 6U extended depth rack that can be locked securely to the new SKB19-R1406 Mighty GigRig for a total of 12U on the front of the combined units. With the option of adding an additional 6U of rear rack rails to the SKB-REX6 as well as the SKB19-R1406 Mighty GigRig expanding to 12U in the front and 12U in the rear for a total of 24U...

SKB 8 Space Audio Video Shelf 1SKB-AV8The AV-8 is an 8U retractable shelf designed to be used with our 1SKB-R102, 1SKB-R104, 1SKB-R106 and 1SKB19-R1208 products. Not only is the AV-8 a great accessory/add-on for those products, but also can be mounted to any slant top mixer case with at least 8U of rack space, including our 1SKB-82DJ, 1SKB-84DJ and 1SKB-106DJ products. The AV-8 is the perfect solution for a laptop or projector.The mounting surface is 17" x 11". The 1SKB-AV8 was designed to...

SKB 10 x 2 Roto Rack/Mixer Console 1SKB-R102 The 1SKB-R102 is a 10U slanted top and 2U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front and rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two...

SKB Audio and DJ Rack Case 1SKB-R104 The 1SKB-R104 is a 10U slanted top and 4U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front and rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA...

SKB Cases 10x6 Roto Rack Console 1SKB-R106 The 1SKB-R106 is a 10U slanted top and 6U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front, rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA...

SKB Cases Rotomolded GigDolly Rotomolded caster board with 5 inch locking caster wheels that will mount to the SKB19-REX6 Expander or the SKB19-R1400 GigSafe for easy transport. Features Rotomolded for strength and durability 5 inch locking wheels

1SKB-R106W | SKB 10x6 Compact Rolling Rig w/ Wheels INVENTORY CLEARANCE The 1SKB-R106W is a 10U slanted top and 6U front rack with wheels, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front, rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid...

SKB Cases | iSeries DaVinci Resolve Micro Panel Case | 3i-18135DAV 18.50" x 13.00" x 4.79" Inside Dimensions The iSeries 3i-18135DAV was designed to fit the Blackmagic Design DaVinci Resolve Micro Panel and features a high quality PE foam interior that has been form cut for a custom fit. All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a water- and dust- tight, submersible design (MIL-C-4150J)...

SKB Cases | ATEM Television Studio Case | 3i-1914N-8ATM 19.02" x 14.52" x 8.02" Inside Dimensions The iSeries 3i-1914N8ATM was designed to fit the Blackmagic Design ATEM Television Studio, and features a high quality PE foam interior that has been form cut for a custom fit. SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (MIL-C-4150J / IP67) that...

SKB Cases | Blackmagic Designed Mini Panel Case | 3i-221710BM1 The iSeries 3i-221710BM1 was designed to fit the Blackmagic Design ATEM Camera Control Panel, ATEM 1 M/E Advanced Panel, or the DaVinci Resolve Mini Panel, and features a high quality PE foam interior that has been form cut for a custom fit. iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a waterproof, submersible design (IP67) that is resistant to corrosion...

Heavy Duty CaseThese tough as nails cases are designed for real abuse. Our Heavy Duty Cases are the containers of choice for transporting goods around the corner or around the world with maximum protection. Features ATA Rated

Heavy Duty CaseThese tough as nails cases are designed for real abuse. Our Heavy Duty Cases are the containers of choice for transporting goods around the corner or around the world with maximum protection. Features ATA Rated

SKB Cases 3SKB-1212M ATA MP Series Case The SKB Maximum Protection case features an ATA 300 rated polyethylene body, twist hasp latches, spring loaded side handles. ID 12 x 12 x 8, no foam These tough as nails cases are designed for real abuse. MP Series Shipping Cases are the containers of choice for transporting goods around the corner or around the world with maximum protection. NOTE:  Available by special order only.  Consider this comparable case iSeries 1717-10B-E *Available...

SKB Cases 3SKB-1616M ATA MP Series Case The SKB Maximum Protection case features an ATA 300 rated polyethylene body, twist hasp latches, spring loaded side handles. ID 16 x 16 x 13, no foam. These tough as nails cases are designed for real abuse. MP Series Shipping Cases are the containers of choice for transporting goods around the corner or around the world with maximum protection. NOTE:  Available by special order only.  Consider this comparable case iSeries 1717-16B-E *Available...