Microphone Cases

SKB Cases | iSeries Sennheiser AVX Case | 3i-0806-3-AVX 8.50" x 6.00" x 3.75" Inside Dimensions The iSeries 3i0806-3-AVX case is designed to accommodate the Sennheiser AVX Wireless Audio System. The interior features custom-cut high quality PE foam that will hold the Sennheiser AVX transmitter, receiver, lav mic, and other accessories. There are also two pockets for additional AVX batteries. SKB 3i Series injection molded Mil-Standard waterproof case with molded copolymer...

SKB Cases | iSeries RodeLink Wireless Case | 3i-0806-3-ROD 8.50" x 6.00" x 3.75" Inside Dimensions The iSeries 3i0806-3-ROD case is designed to accommodate the RodeLink Wireless Audio System with shoe mount attached. The interior is created with a custom-cut high quality PE foam that will hold the RodeLink RX and TX bodypacks as well as an accessory pocket that will house the lav mic and other accessories. SKB 3i Series injection molded Mil-Standard waterproof case with molded copolymer...

SKB Cases | iSeries Waterproof Three Mic Case | 3i-0907-MC3 9.38" x 7.38" x 6.13" Inside Dimensions The 3i-0907-MC3 allows 3 mics to be stored horizontally. Each microphone cutout measures 1.5" wide by 6.75" long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5" in length. By removing the perforated foam piece near the grill of the microphone you can change the shape from being round to square. This will accommodate other popular hand held...

SKB Cases | iSeries Waterproof Shipping Utility Case | Six Microphones | 3i-0907-MC6 9.38 x 7.38 x 6.13" Inside Dimensions The SKB 3i-0907-MC6 holds six mics in a very compact case and is part of the 3i Waterproof Series of cases. It allows 6 mics to be stored horizontally on two separate layers of foam (3 on top and 3 on bottom). Each microphone cutout measures 1.5" wide by 6.75" long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5" in...

SKB Cases | iSeries Waterproof Wireless Four Mic Case | 3i-1813-5WMC 18.50" x 13.00" x 4.79" Inside Dimensions The 3i-1813-5WMC Wireless Mic case is part of the Waterproof Series of cases with a custom foam interior to protect a variety of brands including Shure and Sennheiser mics to name a few. The custom foam interior is designed to cradle each mic and will fit up to four handheld wireless microphones, four wireless body pack transmitters and accessories. Convenient finger holes...

SKB Cases | iSeries Waterproof Wireless Eight Mic Case | 3i-1813-7WMC 18.52" x 13.02" x 7.00" Inside Dimensions The 3i-1813-7WMC Wireless Mic case is part of the Waterproof Series of cases with a custom foam interior to protect a variety of brands including Shure and Sennheiser mics to name a few. This dual layer custom foam interior is designed to cradle each mic and will fit up to eight handheld wireless microphones, eight wireless body pack transmitters and accessories....

iSeries Waterproof 12-Mic Case The 3I-2011-MC12 microphone case holds twelve microphones stored vertically and is part of the iSeries waterproof case line. The microphone holes are designed to secure most popular types of handheld microphones, finger cutouts that provide instant access, and a generous storage compartment for cables and microphone clips. The interior is made of high quality PE foam designed to last. The 3I-2011-MC12 microphone case measures 20" x 11" x 8" deep and is covered by...

SKB | iSeries Waterproof 24-Mic Case | 3i-2015-MC24 20.53" x 15.53" x 10.06" Inside Dimensions The 3i-2015-MC24 case is the largest mic case and holds (24) mics vertically and is extra deep to accommodate longer condenser mics. This case includes a large padded accessory compartment for storage of cables, mic clips or other mic essentials. 3i Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed,...

SKB Cases | Wireless Mic Fly Rack | 3i-221710WMC The 3i-221710WMC iSeries 2217-10 2U Wireless Mic Fly Rack expands on our popular Fly Rack series, allowing for transport of both rack equipment and wireless transmitters all in the same case. This wireless microphone fly rack features a 2 RU injection molded rack frame with space below for four wireless hand held transmitters and four body pack transmitters, with additional space for smaller accessories. This is an excellent solution for...

SKB Cases | Wireless Mic Fly Rack | 3i-231714WMC The 3i-231714WMC 4U Wireless Mic Fly Rack allows for transport of both rack equipment and wireless transmitters all in the same case. This case features a 4U injection molded rack frame with space below for four wireless handheld transmitters and four body pack transmitters, with additional space for smaller accessories. All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer...

SKB | iSeries Waterproof Sennheiser EW Wireless Mic Case | 3i0907-4-SWK 9.00" x 7.00" x 4.00" Interior Dimensions The 3i0907-4-SWK Custom interior Sennheiser EW Wireless System Mic case is a very compact case and is part of the iSeries Waterproof cases. The interior features a custom cut polyethylene (PE) foam interior that will accommodate a wireless plug-on transmitter, wireless body pack transmitter, wireless body pack receiver with an extra spot for a lavaliere...

12 MicrophonesAnvil 1/4" ATA Hinged Lid style case with Ester foam interior, foam filled lid, recessed hardware and ABS exterior. Case will hold (12) Microphones (set upright) in circular cutouts: 2 x 2 x 10" (each).Quantity and / or Government pricing is available for qualified buyers - Please contact our Sales and Design Team or Request A Quote.Images provided are for product representational purposes only. Due to the custom nature of this product, final appearance may differ. ...

12 Microphones + Accessory CompartmentAnvil 1/4" ATA Hinged Lid style case with Ester foam interior, foam filled lid, recessed hardware and ABS exterior. Case will hold (12) Microphones (set upright) in circular cutouts: 2 x 2 x 10" (each) and (1) foam lined Accessory compartment.Quantity and / or Government pricing is available for qualified buyers - Please contact our Sales and Design Team or Request A Quote.Images provided are for product representational purposes only. Due to the custom...

24 MicrophonesAnvil 1/4" ATA Hinged lid case with Ester foam interior, foam filled lid, recessed hardware and ABS exterior. Case contains circular cutouts for 24 Microphones.Quantity and / or Government pricing is available for qualified buyers - Please contact our Sales and Design Team or Request A Quote.Images provided are for product representational purposes only. Due to the custom nature of this product, final appearance may differ. ...

30 MicrophonesAnvil 1/4" ATA Hinged Lid style case with Ester foam interior, foam filled lid, recessed hardware, ABS exterior. Case will hold (30) Microphones (set upright) in circular cutouts: 2 x 2 x 10" (each).Quantity and / or Government pricing is available for qualified buyers - Please contact our Sales and Design Team or Request A Quote.Images provided are for product representational purposes only. Due to the custom nature of this product, final appearance may differ. ...

30 Microphones + Accessory TrayAnvil 1/4" ATA Hinged Lid style case with Ester foam interior, foam filled lid, recessed hardware, ABS exterior. Case will hold (30) Microphones (set upright) in circular cutouts: 2 x 2 x 10" (each)and (1) foam lined Accessory lift out tray.Quantity and / or Government pricing is available for qualified buyers - Please contact our Sales and Design Team or Request A Quote.Images provided are for product representational purposes only. Due to the custom nature of...

6 Microphones + Accessory CompartmentAnvil 1/4" ATA Hinged Lid case with Ester foam interior, foam filled lid, recessed hardware and Black ABS exterior. Case will hold (6) Microphones (set upright) in circular cutouts: 2 x 2 x 10" (each) and (1) foam lined Accessory compartment.Quantity and / or Government pricing is available for qualified buyers - Please contact our Sales and Design Team or Request A Quote.Images provided are for product representational purposes only. Due to the custom...