SKB Cases | TSA Combination Padlocks | 1SKB-PDLTSA Combination Padlocks (Set of 2)TSA compliant padlocks provide convenient and secure airport cargo inspection. Three digit dial allows you to set your own combination.The Transportation Security Administration (TSA) baggage screeners are trained to recognize the Travel Sentry logo on TSA accepted locks, which allow them to open, inspect and re-lock baggage.

SKB Cases | TSA Cable Combination Padlocks | 1SKB-PDL-CTSA Combination Padlocks (Set of 2) Cable LockTSA accepted padlocks provide convenient and secure airport cargo inspection. Three digit dial allows you to set your own combination and are easily recognizable by TSA screeners. The Transportation Security Administration (TSA) baggage screeners are trained to recognize the Travel Sentry logo on TSA accepted locks, which allow them to open, inspect and relock baggage.

SKB 3R Forklift Riser KitThe 3R-FLRK Forklift Riser Kit is designed to bolt onto all 3R Series cases that do not come standard with edge wheels. Once installed, the kit provides a 4" clearance under the case to allow for forklift or pallet jack access. The risers are molded of reinforced nylon for maximum durability, and the kit includes all necessary hardware for installation: stainless steel screws, nylon insert locking nuts, and EPDM-backed sealing washers to maintain the waterproof...

SKB R Series Wheel Kit 3R-WK12Edge Wheel kit for R Series cases. This kit includes two assembled wheels and hardware needed to convert any R Series case that does not come standard with wheels. The kit includes: 1 Cutout Template, 8 Screws, 8 Nylock Nuts, 8 Sealing Washers, 2 Gaskets, and 2 Wheel Assemblies. Compatible with: 3R2216-15B-E, 3R2222-20B-C, 3R2222-20B-E, 3R2424-24B-E, 3R2424-24B-L, 3R2727-18B-E, 3R2727-18B-L, 3R2727-27B-E, 3R2727-27B-L, 3R3517-14B-E, 3R4024-18B-E, 3R4024-18B-L,...

Shipping Label PlateThis aluminum shipping label plate can be added to the exterior of Shock Racks, 3R Series and the 3i Series cases to adhere shipping labels or marking of products for inventory. The label measures 12" x 7" and can be mounted to any product for secure labeling.The installation kit is complete with stainless steel mounting screws, rubber backed sealing washers and nylock nuts to maintain the watertight seal of the cases.

SKB Cases | 3i-0907-4 & 3i-0907-6 Panel Ring Kit | 3i-0907-PRK The SKB 3i-0907-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for 3i-0907-4 and 3i-0907-6 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1006 Panel Ring Kit | 3i-1006-PRK The SKB 3i-1006-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1006 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1209 Panel Ring Kit | 3i-1209-PRK The SKB 3i-1209-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1209 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1309 Panel Ring Kit | 3i-1309-PRK The SKB 3i-1309-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1309 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1510 Panel Ring Kit | 3i-1510-PRK The SKB 3i-1510-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1510 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1610 Panel Ring Kit | 3i-1610-PRK The SKB 3i-1610-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1610 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1706 Panel Ring Kit | 3i-1706-PRK The SKB 3i-1706-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1706 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1711 Panel Ring Kit | 3i-1711-PRK The SKB 3i-1711-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1711 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1717 Panel Ring Kit | 3i-1717-PRK The SKB 3i-1717-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1717 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1813 Panel Ring Kit | 3i-1813-PRK The SKB 3i-1813-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1813 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1914 Panel Ring Kit | 3i-1914-PRK The SKB 3i-1914-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1914 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-2011 Panel Ring Kit | 3i-2011-PRK The SKB 3i-2011-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-2011 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-2015 Panel Ring Kit | 3i-2015-PRK The SKB 3i-2015-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-2015 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

iSeries HD73 Small Replacement Colored Handle Available in four colors, (BE) blue, (RD) red, (GN) green and (YW) yellow. Small Colored Handle is 4.875" long.  Easy to install kit includes instructions and new mounting pins. Compatible with the following 3i Series cases: 3i-0806-3, 3i-1006-3, 3i-0907-4, 3i-0907-6, 3i-1309-6.

iSeries HD80 Medium Replacement Colored Handle Available in four colors, (BE) blue, (RD) red, (GN) green and (YW) yellow. Medium Handle is 6.75" long. Easy to install kit includes instructions and new mounting pins.Replaces the front handle on the following iSeries cases: 3i-1510-6, 3i-1711-6, 1813-7, 3i-1914-8, 3i-3614-6 The 3i-HD Medium Colored Handle will also replace the side handle(s) on the following cases: 3i-1914-8, 3i-2015-7. 3i-2015-10, 3i-2217-10, 3i-2217-12. 3i-2222-12,...

iSeries HD81 Medium Replacement Colored Handle Available in four colors, (BE) blue, (RD) red, (GN) green and (YW) yellow. The 3i-HD81 Large Colored Handle is 8.625" long. Easy to install kit includes instructions and new mounting pins.Accommodates the following iSeries cases: 3i-1914N-8, 3i-2011-7, 3i-2011-8, 3i-2015-7, 3i-2015-10, 3i-2217-8, 3i-2217-10, 3i-2217-12, 3i-2222-12, 3i-4214-5, 3i-4217-7, 3i-4909-6, 3i-5014-6.

SKB Cases | Panel Mount Clip Kit 3i-PMCK Accommodates any size 3i Series case. Secures a mounting panel of your choice for a convenient and finished appearance. Includes (8) panel mounts that have pressed in brass inserts, O-ring seals, (16) mounting screws, a drill guide and even the necessary drill bit for a quick and easy installation.

TSA Locking Trigger Latch KitIncludes (2) TSA locking latches, replacement pins and (2) keys that are quick and easy to install.Accommodates the following 3i Series cases: 3i-0907-4xx and 3i-0907-6xx.

TSA Locking Trigger Latch KitIncludes (2) TSA locking latches, replacement pins and (2) keys that are quick and easy to install.Accommodates the following 3i Series cases: 3i-1209-4B, 3i-1711-6B, and 3i-1813-5B.

TSA Locking Trigger Latch KitIncludes (2) TSA locking latches, replacement pins and (2) keys that are quick and easy to install.Accommodates the following 3i Series cases: 3i-1309-6B, 3i-1510-6B, 3i-1610-5B, 3i-1813-7B, 3i-1914N-8B, 3i-1914-8B, 3i-2011-7B, 3i-2011-8B, 3i-2015-7B, 3i-2015-10B, 3i-2217-8B, 3i-2217-10B, 3i-2217-12B, 3i-2317-14B, 3i-2222-12B, 3i-2617-12B, 3i-2918-10B, 3i-2918-14B, 3i-3021-18B, 3i-3026-15B, 3i-3614-6B, 3i-4215-5B, 3i-4213-12B, 3i-4217-7B, 3i-4909-5B, 3i-5014-6B,...

iSeries 0907-6 Think Tank Designed Divider Set SKB has teamed up with Think Tank Photo the premier photo/video bag and backpack company to design quality interiors that provide the best of both worlds: soft case adaptability with the unparalleled strength and durability people expect from SKB's versatile watertight, airline-tough cases.The 5DV-09076-TT fits iSeries 0907-6 cases and features a closed cell fitted foam liner and dividers that are wrapped in Nylex, with heavy duty hook-and-loop...

iSeries 1209-4 Think Tank Designed Divider Set SKB has teamed up with Think Tank Photo the premier photo/video bag and backpack company to design quality interiors that provide the best of both worlds: soft case adaptability with the unparalleled strength and durability people expect from SKB's versatile watertight, airline-tough cases.The 5DV-12094-TT fits iSeries 1209-4 cases and features a closed cell fitted foam liner and dividers that are wrapped in Nylex, with heavy duty hook-and-loop...

iSeries 1309-6 Think Tank Designed Divider SetSKB has teamed up with Think Tank Photo?the premier photo/video bag and backpack company?to design quality interiors that provide the best of both worlds: soft case adaptability with the unparalleled strength and durability people expect from SKB's versatile watertight, airline-tough cases.The 5DV-1309-TT fits iSeries 1309-6 cases and features a closed cell fitted foam liner and dividers that are wrapped in Nylex, with heavy duty hook-and-loop tabs...

iSeries 1510-6 Think Tank Designed Divider SetSKB has teamed up with Think Tank Photo?the premier photo/video bag and backpack company?to design quality interiors that provide the best of both worlds: soft case adaptability with the unparalleled strength and durability people expect from SKB's versatile watertight, airline-tough cases.The 5DV-1510-TT fits iSeries 1510-6 cases and features a closed cell fitted foam liner and dividers that are wrapped in Nylex, with heavy duty hook-and-loop tabs...

iSeries 1209-4 Think Tank Designed Divider Set SKB has teamed up with Think Tank Photo the premier photo/video bag and backpack company to design quality interiors that provide the best of both worlds: soft case adaptability with the unparalleled strength and durability people expect from SKB's versatile watertight, airline-tough cases.The 5DV-15104-TT fits iSeries 1510-4 cases and features a closed cell fitted foam liner and dividers that are wrapped in Nylex, with heavy duty hook-and-loop...

iSeries 1510-9 Think Tank Designed Divider Set SKB has teamed up with Think Tank Photo the premier photo/video bag and backpack company to design quality interiors that provide the best of both worlds: soft case adaptability with the unparalleled strength and durability people expect from SKB's versatile watertight, airline-tough cases.The 5DV-15109-TT fits iSeries 1510-9 cases and features a closed cell fitted foam liner and dividers that are wrapped in Nylex, with heavy duty hook-and-loop...

iSeries 1610-10 Think Tank Designed Divider SetSKB has teamed up with Think Tank Photo?the premier photo/video bag and backpack company?to design quality interiors that provide photographers and videographers with the best of both worlds: soft case adaptability with the unparalleled strength and durability people expect from SKB's versatile watertight, airline-tough cases.The 5DV-1610-TT fits the iSeries 1610-10 case and features a 8.5" deep closed cell fitted foam liner and heavy duty hinged...