SKB Cases

3RR 3RS Shock Rack Caster PlatformRoto molded caster board with 4" locking wheels for convenient stacking and transportation of SKB's Roto Molded 3RR and 3RS Series military standard shock rack cases.The 3RR-RCB includes interlocking stacking lugs and a durable cinch strap that secure the cases to the caster platform. Features 4" locking wheels Heavy duty cinch strap

SKB Cases | A/V Shelf for Mighty GigRig | 1SKB-AV14 The 1SKB-AV14 is a uniquely designed scissor hinged shelf that puts a shelf just where it is needed. The hook and loop surface of the A/V shelf is ideal for laptop computers, projectors, or monitors. The scissor design allows the shelf to remain connected to the Mighty GigRig or GigSafe while the lid is closed. The steel arms only require 2U of rack space for secure mounting.

SKB Cases | 8U Rear Rail Kit | 1SKB-RRK8 The 8U Rear Rack Kit for rack series cases is the perfect addition to your rack mount case. Hardware is included with the kit.

SKB Cases | 6U Rear Rail Kit | 1SKB-RRK6 The 6U Rear Rack Kit for rack series cases is the perfect addition to your rack mount case. Hardware is included with the kit.

SKB Cases | 4U Rear Rail Kit | 1SKB-RRK4 The 4U Rear Rack Kit for rack series cases is the perfect addition to your rack mount case. Hardware is included with the kit.

SKB Cases | 12U Rear Rail Kit | 1SKB-RRK12 The 12U Rear Rack Kit for rack series cases is the perfect addition to your rack mount case. Hardware is included with the kit.

SKB Cases | 10U Rear Rail Kit | 1SKB-RRK10 The 10U Rear Rack Kit for rack series cases is the perfect addition to your rack mount case. Hardware is included with the kit.

SKB Cases | 5U 30” Deep Static Shock Rack Mount Case | 3RS-5U30-25B The SKB 3RS Series 5U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810H standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 4U 30” Deep Static Shock Rack Mount Case | 3RS-4U30-25B The SKB 3RS Series 4U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810H standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 3U 30” Deep Static Shock Rack Mount Case | 3RS-3U30-25B The SKB 3RS Series 3U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810H standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

Roto and Shallow Rack Caster PlatformRoto molded caster board with 4" locking wheels for stacking and moving SKB's Roto Molded, Shallow Roto Racks and Standard Racks for convenient transportation.The Roto Caster Board includes durable cinch straps that secure to the side handles for stability. Features Four inch locking wheels Heavy duty cinch straps

SKB Cases | TSA Combination Padlocks | 1SKB-PDLTSA Combination Padlocks (Set of 2)TSA compliant padlocks provide convenient and secure airport cargo inspection. Three digit dial allows you to set your own combination.The Transportation Security Administration (TSA) baggage screeners are trained to recognize the Travel Sentry logo on TSA accepted locks, which allow them to open, inspect and re-lock baggage.

SKB Cases | TSA Cable Combination Padlocks | 1SKB-PDL-C TSA Combination Padlocks (Set of 2) Cable LockTSA accepted padlocks provide convenient and secure airport cargo inspection. Three digit dial allows you to set your own combination and are easily recognizable by TSA screeners. The Transportation Security Administration (TSA) baggage screeners are trained to recognize the Travel Sentry logo on TSA accepted locks, which allow them to open, inspect and relock baggage. ...

Shipping Label PlateThis aluminum shipping label plate can be added to the exterior of Shock Racks, 3R Series and the 3i Series cases to adhere shipping labels or marking of products for inventory. The label measures 12" x 7" and can be mounted to any product for secure labeling.The installation kit is complete with stainless steel mounting screws, rubber backed sealing washers and nylock nuts to maintain the watertight seal of the cases.

SKB 3R Forklift Riser Kit The 3R-FLRK Forklift Riser Kit is designed to bolt onto all 3R Series cases that do not come standard with edge wheels. Once installed, the kit provides a 4" clearance under the case to allow for forklift or pallet jack access. The maximum weight capacity is 500lbs. The risers are molded of reinforced nylon for maximum durability, and the kit includes all necessary hardware for installation: stainless steel screws, nylon insert locking nuts, and EPDM-backed sealing...

SKB R Series Wheel Kit 3R-WK12 Edge Wheel kit for R Series cases. This kit includes two assembled wheels and hardware needed to convert any R Series case that does not come standard with wheels. The kit includes: 1 Cutout Template, 8 Screws, 8 Nylock Nuts, 8 Sealing Washers, 2 Gaskets, and 2 Wheel Assemblies. The maximum weight capacity is 500lbs. Compatible with: 3R2216-15B-E, 3R2222-20B-C, 3R2222-20B-E, 3R2424-24B-E, 3R2424-24B-L, 3R2727-18B-E, 3R2727-18B-L, 3R2727-27B-E, 3R2727-27B-L,...

SKB R Series Locking Loop Option Lock option for 3R cases.

SKB R Series Latch w/Wire Padlock Option Lock option for 3R cases.

SKB Document or Card Holder | 3SKB-DH Document/card holder with clear plastic cover. Dimensions: Overall length: 5.85" Overall width: 3.60" Card pocket length: 5.08" Hole diameter: 0.14"

3i-221312BKB Blackmagic URSA Broadcast Camera Case The iSeries 3i-221312BKB was designed to fit the Blackmagic URSA Broadcast Camera and accessories. The case interior features high quality PE foam that's been form cut to fit the camera with fiber converter attached. There are additional pockets for the studio fiber converter box, the URSA viewfinder, and small accessories.  iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer...

SKB Cases | Blackmagic URSA Mini Case | 3i-221312BKU The iSeries 3i-221312BKU was designed to fit the Blackmagic URSA Mini camera and accessories, and features a high quality PE form-cut foam interior with removable foam blocks to accommodate any setting of the camera shoulder mount. Additional pockets provide room for four (4) CFast cards, a pair of 8" and 12" rods, and power supply, as well additional batteries, lenses, or other accessories. The wall joining these accessory compartments can...

SKB Cases | Waterproof Canon C200 Case | 3i-221312CA2 The iSeries 3i-221312CA2 was designed to fit the Canon C200 and accessories, and features a high quality PE foam interior that has been form cut to accommodate the camera with top handle installed. Additional pockets will securely house two (2) batteries, the monitor unit, dual battery charger, power supply, most 13" laptops, documents, and additional accessories. iSeries injection molded waterproof cases are constructed of ultra...

SKB Cases | iSeries  MIL-STD Waterproof Pistol Case | 3i-1209-4SP 12.00" x 9.00" x 4.50" Inside Dimensions SKB 3i Series injection molded Mil-Standard waterproof case with molded copolymer polypropylene shell. Features water and dust tight submersible design (MIL-C-4150J), resistant to UV, solvent, corrosion, fungus and impact damage (MIL-STD-810H). Also features molded-in hinge, patent pending "trigger release" latch system, snap-down rubber over-molded cushion grip handle and...

SKB Cases | iSeries MIL-STD Waterproof Pistol Case | 3i-1006-SP 10.75" x 6.13" x 3.25" Inside Dimensions SKB 3i Series injection molded Mil-Standard waterproof case with molded copolymer polypropylene shell. Features water and dust tight submersible design (MIL-C-4150J), resistant to UV, solvent, corrosion, fungus and impact damage (MIL-STD-810H). Also features molded-in hinge, patent pending "trigger release" latch system, snap-down rubber over-molded cushion grip handle and...