SKB Cases

SKB Cases | 6U 13” iSeries Injection Molded Fly Rack Case | 3i-2317M146U The SKB injection molded waterproof Fly Rack Cases are lighter in weight and more affordable than previous models, all without compromising strength or durability. Rack frames are removable and fit easily into SKB's iSeries cases, where they are protected by high quality polyethylene (PE) foam that provides space for protruding knobs and buttons. At less than half the weight of standard shock racks, SKB Fly Racks feature...

SKB Cases | 6U 20” iSeries Injection Molded Fly Rack Case | 3i-2424M146U Shallow Fly Rack frames are 20" deep from rail to rail, providing a great solution for shallow recording interfaces, video switchers, or wireless microphone receivers. All Shallow Fly Rack cases feature TSA locking latches and a pull out handle/wheels for easy towing, as well as a pocket below each of the racks for cables and additional accessories.The SKB injection molded waterproof Fly Rack Cases are lighter in weight...

SKB Cases | 4U iSeries Injection Molded Guitar FX Fly Rack Case | 3i-231714GFX The 3i-231714GFX 4U Guitar FX Fly Rack allows for transport of both guitar processor rack equipment and a foot controller all in the same case. This case was designed specifically for the Kemper Profiler and Line 6 Helix rackmount processors and foot controllers. The top tray features robust ABS plastic and high density foam, with precut holes to perfectly match the foot controller feet and prevent movement or...

SKB Cases | 5U 30” Deep Static Shock Rack Mount Case | 3RS-5U30-25B The SKB 3RS Series 5U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 4U 30” Deep Static Shock Rack Mount Case | 3RS-4U30-25B The SKB 3RS Series 4U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 3U 30” Deep Static Shock Rack Mount Case | 3RS-3U30-25B The SKB 3RS Series 3U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 3U 24” Deep Static Shock Rack Mount Case | 3RS-3U24-22B The SKB 3RS Series 3U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 4U 24” Deep Static Shock Rack Mount Case | 3RS-4U24-25B The SKB 3RS Series 4U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 5U 24” Deep Static Shock Rack Mount Case | 3RS-5U24-25B The SKB 3RS Series 5U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 7U 24” Deep Static Shock Rack Mount Case | 3RS-7U24-25B The SKB 3RS Series 7U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | iSeries Waterproof Shipping Utility Case (Empty) | 3i-3019-12BE 30.50" x 19.50" x 12.00" Inside Dimensions The SKB 3i-3019-12BE is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810G). Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion...

SKB Cases | iSeries Waterproof Shipping Utility Case (Cubed Foam) | 3i-3019-12BC 30.50" x 19.50" x 12.00" Inside Dimensions The SKB 3i-3019-12BC is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810G). Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded...

SKB Cases | iSeries Waterproof Shipping Utility Case (Empty) | 3i-4909-5B-E 49.00" x 9.00" x 5.00" Inside Dimensions The SKB 3i-4909-5B-E is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810G). Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip...

SKB Cases | iSeries Waterproof Shipping Utility Case (Layered Foam) | 3i-4909-5B-L 49.00" x 9.00" x 5.00" Inside Dimensions The SKB 3i-4909-5B-L is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810G). Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded...

SKB Cases | iSeries Waterproof Shipping Case (Empty) | 3i-2424-10BE 24.00" x 24.00" x 10.00" Inside Dimensions SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra-high-strength polypropylene copolymer resin, featuring a gasket sealed, water and dust tight, submersible design (MIL-C-4150J / IP67) that is resistant to corrosion and impact damage. Features include a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion...

SKB Cases | iSeries MIL-STD Waterproof Shotgun Case | 3i-3614-CB 36.50" x 14.50" x 6.00" Inside Dimensions SKB 3i Series injection molded Mil-Standard waterproof case with molded copolymer polypropylene shell. Features water and dust tight submersible design (MIL-C-4150J), resistant to UV, solvent, corrosion, fungus and impact damage (MIL-STD-810G). Also features molded-in hinge, patent pending "trigger release" latch system, snap-down rubber over-molded cushion grip handle,...

SKB Cases | iSeries MIL-STD Waterproof Double Shotgun Case | 3i-3614-CBD 36.50" x 14.50" x 6.00" Inside Dimensions SKB 3i Series injection molded Mil-Standard waterproof case with molded copolymer polypropylene shell. Features water and dust tight submersible design (MIL-C-4150J), resistant to UV, solvent, corrosion, fungus and impact damage (MIL-STD-810G). Also features molded-in hinge, patent pending "trigger release" latch system, snap-down rubber over-molded cushion...

SKB Cases | iSeries MIL-STD Waterproof Bow Case | M4 Rifle | 3i-3614-DR 36.50" x 14.50" x 6.00" Inside Dimensions SKB 3i Series injection molded Mil-Standard waterproof case with molded copolymer polypropylene shell. Features water and dust tight submersible design (MIL-C-4150J), resistant to UV, solvent, corrosion, fungus and impact damage (MIL-STD-810G). Also features molded-in hinge, patent pending "trigger release" latch system, snap-down rubber over-molded cushion grip...

SKB Cases | iSeries Waterproof Shipping Utility Case (Empty) | 3i-2617-12BE 26.08" x 17.50" x 12.00" Inside Dimensions The SKB 3i-2617-12BE is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810G). Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion...

SKB Cases | iSeries Waterproof Shipping Utility Case (Cubed Foam) | 3i-2617-12BC 26.08" x 17.50" x 12.00" Inside Dimensions The SKB 3i-2617-12BC is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810G). Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded...

SKB Cases | iSeries Waterproof Shipping Utility Case (Empty) | 3i-3021-18BE 30.00" x 21.00" x 18.00" Inside Dimensions The SKB 3i-3021-18BE is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810G). Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion...

SKB Cases | iSeries Waterproof Shipping Utility Case (Cubed Foam) | 3i-3021-18BC 30.00" x 21.00" x 18.00" Inside Dimensions The SKB 3i-3021-18BC is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810G). Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded...

SKB Cases | iSeries Waterproof Shipping Utility Case (Empty) | 3i-3026-15BE 30.75" x 26.00" x 15.50" Inside Dimensions The SKB 3i-3026-15BE is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810G). Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion...

SKB Cases | iSeries Waterproof Shipping Utility Case (Cubed Foam) | 3i-3026-15BC 30.75" x 26.00" x 15.50" Inside Dimensions The SKB 3i-3026-15BC is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810G). Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded...