SKB Cases

SKB The Mighty GigRig Expander The new SKB-REX6 Expander Rack gives added rack space to the SKB19-R1406 Mighty GigRig. The SKB-REX6, 6U Expander Rack Case features a 6U extended depth rack that can be locked securely to the new SKB19-R1406 Mighty GigRig for a total of 12U on the front of the combined units. With the option of adding an additional 6U of rear rack rails to the SKB-REX6 as well as the SKB19-R1406 Mighty GigRig expanding to 12U in the front and 12U in the rear for a total of 24U...

SKB 8 Space Audio Video Shelf 1SKB-AV8The AV-8 is an 8U retractable shelf designed to be used with our 1SKB-R102, 1SKB-R104, 1SKB-R106 and 1SKB19-R1208 products. Not only is the AV-8 a great accessory/add-on for those products, but also can be mounted to any slant top mixer case with at least 8U of rack space, including our 1SKB-82DJ, 1SKB-84DJ and 1SKB-106DJ products. The AV-8 is the perfect solution for a laptop or projector.The mounting surface is 17" x 11". The 1SKB-AV8 was designed to...

SKB 10 x 2 Roto Rack/Mixer Console 1SKB-R102 The 1SKB-R102 is a 10U slanted top and 2U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front and rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two...

SKB Audio and DJ Rack Case 1SKB-R104 The 1SKB-R104 is a 10U slanted top and 4U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front and rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA...

SKB Cases 10x6 Roto Rack Console 1SKB-R106 The 1SKB-R106 is a 10U slanted top and 6U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front, rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA...

SKB Cases Rotomolded GigDolly Rotomolded caster board with 5 inch locking caster wheels that will mount to the SKB19-REX6 Expander or the SKB19-R1400 GigSafe for easy transport. Features Rotomolded for strength and durability 5 inch locking wheels

SKB Cases | iSeries DaVinci Resolve Micro Panel Case | 3i-18135DAV 18.50" x 13.00" x 4.79" Inside Dimensions The iSeries 3i-18135DAV was designed to fit the Blackmagic Design DaVinci Resolve Micro Panel and features a high quality PE foam interior that has been form cut for a custom fit. All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a water- and dust- tight, submersible design (MIL-C-4150J)...

SKB Cases | ATEM Television Studio Case | 3i-1914N-8ATM 19.02" x 14.52" x 8.02" Inside Dimensions The iSeries 3i-1914N8ATM was designed to fit the Blackmagic Design ATEM Television Studio, and features a high quality PE foam interior that has been form cut for a custom fit. SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (MIL-C-4150J / IP67) that...

SKB Cases | Blackmagic Designed Mini Panel Case | 3i-221710BM1 The iSeries 3i-221710BM1 was designed to fit the Blackmagic Design ATEM Camera Control Panel, ATEM 1 M/E Advanced Panel, or the DaVinci Resolve Mini Panel, and features a high quality PE foam interior that has been form cut for a custom fit. iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a waterproof, submersible design (IP67) that is resistant to corrosion...

SKB Cases | Waterproof Custom 27 inch iMac Case | 3i-2922-iMAC The 3i-2922-iMAC has been designed especially to accommodate 27" iMacs (2014 or later models), with room for a keyboard, mouse, and all necessary cables. This waterproof iSeries case features a virtually indestructible exterior and a custom plush-lined EPS interior that provides the perfect fit and maximum protection of a 27" iMac and accessories in transport. The case also comes standard with TSA-retrofittable trigger latches,...

SKB Cases | 3U 20” Deep Static Shock Rack Mount Case | 3RS-3U20-22B The SKB 3RS Series 3U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 4U 20” Deep Static Shock Rack Mount Case | 3RS-4U20-22B The SKB 3RS Series 4U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 5U 20” Deep Static Shock Rack Mount Case | 3RS-5U20-22B The SKB 3RS Series 5U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 6U 20” Deep Static Shock Rack Mount Case | 3RS-6U20-22B The SKB 3RS Series 6U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 7U 20” Deep Static Shock Rack Mount Case | 3RS-7U20-22B The SKB 3RS Series 7U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 9U 20” Deep Static Shock Rack Mount Case | 3RS-9U20-22B The SKB 3RS Series 9U Static Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 2U 9” iSeries Injection Molded Fly Rack Case | 3i-2011M72U Shallow Fly Rack frames are 9" deep from rail to rail, providing a great solution for shallow recording interfaces, video switchers, or wireless microphone receivers. All Shallow Fly Rack cases feature TSA locking latches and a pull out handle/wheels for easy towing, as well as a pocket below each of the racks for cables and additional accessories.The SKB injection molded waterproof Fly Rack Cases are lighter in weight and...

SKB Cases | 2U 13” iSeries Injection Molded Fly Rack Case | 3i-2215M82U The SKB injection molded waterproof Fly Rack Cases are lighter in weight and more affordable than previous models, all without compromising strength or durability. Rack frames are removable and fit easily into SKB's iSeries cases, where they are protected by high quality polyethylene (PE) foam that provides space for protruding knobs and buttons. At less than half the weight of standard shock racks, SKB Fly Racks feature...

SKB Cases | 3U 9” iSeries Injection Molded Fly Rack Case | 3i-2011M103U Shallow Fly Rack frames are 9" deep from rail to rail, providing a great solution for shallow recording interfaces, video switchers, or wireless microphone receivers. All Shallow Fly Rack cases feature TSA locking latches and a pull out handle/wheels for easy towing, as well as a pocket below each of the racks for cables and additional accessories.The SKB injection molded waterproof Fly Rack Cases are lighter in weight and...

SKB Cases | 3U 20” iSeries Injection Molded Fly Rack Case | 3i-2424M103U Shallow Fly Rack frames are 20" deep from rail to rail, providing a great solution for shallow recording interfaces, video switchers, or wireless microphone receivers. All Shallow Fly Rack cases feature TSA locking latches and a pull out handle/wheels for easy towing, as well as a pocket below each of the racks for cables and additional accessories.The SKB injection molded waterproof Fly Rack Cases are lighter in weight...

SKB Cases | 4U 9” iSeries Injection Molded Fly Rack Case | 3i-2213M124U The SKB injection molded waterproof Fly Rack Cases are lighter in weight and more affordable than previous models, all without compromising strength or durability. Rack frames are removable and fit easily into SKB's iSeries cases, where they are protected by high quality polyethylene (PE) foam that provides space for protruding knobs and buttons. At less than half the weight of standard shock racks, SKB Fly Racks feature...

SKB Cases | 2U 13” iSeries Injection Molded Fly Rack Case | 3i-2217M82U The SKB injection molded waterproof Fly Rack Cases are lighter in weight and more affordable than previous models, all without compromising strength or durability. Rack frames are removable and fit easily into SKB's iSeries cases, where they are protected by high quality polyethylene (PE) foam that provides space for protruding knobs and buttons. At less than half the weight of standard shock racks, SKB Fly Racks feature...

SKB Cases | 3U 13” iSeries Injection Molded Fly Rack Case | 3i-2217M103U The SKB injection molded waterproof Fly Rack Cases are lighter in weight and more affordable than previous models, all without compromising strength or durability. Rack frames are removable and fit easily into SKB's iSeries cases, where they are protected by high quality polyethylene (PE) foam that provides space for protruding knobs and buttons. At less than half the weight of standard shock racks, SKB Fly Racks feature...

SKB Cases | 4U 13” iSeries Injection Molded Fly Rack Case | 3i-2217M124U The SKB injection molded waterproof Fly Rack Cases are lighter in weight and more affordable than previous models, all without compromising strength or durability. Rack frames are removable and fit easily into SKB's iSeries cases, where they are protected by high quality polyethylene (PE) foam that provides space for protruding knobs and buttons. At less than half the weight of standard shock racks, SKB Fly Racks feature...