SKB Cases

SKB Cases | 3i-2015-7 Case Replacement Foam Set SKB 3i Series injection molded Mil-Standard waterproof case replacement foam set. Includes Ether like Ester (ELE) foam layers for body and convoluted foam layer for lid.

SKB Cases | 3i-2015-10 Case Replacement Foam Set SKB 3i Series injection molded Mil-Standard waterproof case replacement foam set. Includes Ether like Ester (ELE) foam layers for body and convoluted foam layer for lid.

SKB Cases | 3i-2217-12 Case Replacement Foam Set SKB 3i Series injection molded Mil-Standard waterproof case replacement foam set. Includes Ether like Ester (ELE) foam layers for body and convoluted foam layer for lid.

SKB Cases | 3i-2222-12 Case Replacement Foam Set SKB 3i Series injection molded Mil-Standard waterproof case replacement foam set. Includes Ether like Ester (ELE) foam layers for body and convoluted foam layer for lid.

SKB Cases | 3i-2317-14 Case Replacement Foam Set SKB 3i Series injection molded Mil-Standard waterproof case replacement foam set. Includes Ether like Ester (ELE) foam layers for body and convoluted foam layer for lid.

SKB Cases | 3i-2617-12 Case Replacement Foam Set SKB 3i Series injection molded Mil-Standard waterproof case replacement foam set. Includes Ether like Ester (ELE) foam layers for body and convoluted foam layer for lid.

SKB Cases | 3i-2918-10 Case Replacement Foam Set SKB 3i Series injection molded Mil-Standard waterproof case replacement foam set. Includes Ether like Ester (ELE) foam layers for body and convoluted foam layer for lid.

SKB Cases | 3i-2918-14 Case Replacement Foam Set SKB 3i Series injection molded Mil-Standard waterproof case replacement foam set. Includes Ether like Ester (ELE) foam layers for body and convoluted foam layer for lid.

SKB Cases | 3i-3021-18 Case Replacement Foam Set SKB 3i Series injection molded Mil-Standard waterproof case replacement foam set. Includes Ether like Ester (ELE) foam layers for body and convoluted foam layer for lid.

SKB Cases | 3i-3026-15 Case Replacement Foam Set SKB 3i Series injection molded Mil-Standard waterproof case replacement foam set. Includes Ether like Ester (ELE) foam layers for body and convoluted foam layer for lid.

SKB Cases | 11U 20” Deep Removable Shock Rack Mount Case | 3RR-11U20-22B The SKB 3RR Series 11U Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150 lbs...

SKB Cases | 14U 20” Deep Static Shock Rack Mount Case | 3RR-14U20-22B The SKB 3RR Series 14U Removable Shock Rack Mount case from Cases2Go is lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets MIL-STD 810G standards, this Shock Rack features 8 elastomeric shock absorbers which allow for a standard payload range of 40 to 150...

SKB Cases | iSeries Waterproof Shipping Utility Case (Empty) | 3i-0702-1B-E 7.76" x 2.15" x 1.30" Inside Dimensions The SKB 3i-0702-1B-E is molded of ultra-high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810G). Includes custom foam interior to cradle two cigars. The SKB iSeries of waterproof shipping and utility cases are the...

SKB Cases | iSeries Waterproof Shipping Utility Case | Cigar Case | 3i-0702-1B-CC 7.75 x 2.15 x 1.3" Inside Dimensions The SKB 3i-0702-1B-CC is molded of ultra-high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810G). Includes custom foam interior to cradle two cigars. The SKB iSeries of waterproof shipping and utility cases are...

SKB Cases | 20" Deep 4U Roto Shock Rack | 3SKB-R04U20W The 3SKB-R04U20W Rolling Shockmount Case incorporates black powder coated twist latches with locking loops and a low profile injection molded pull handle with a 20 inch deep tough rotomolded shell. The molded design provides extra stiffness in the lids and sides and allows for secure stacking. Rack depth front to rear rail is 20 inches and each lid is 2-1/4 inches deep. Rack rails are pre-threaded for standard 10-32 hardware and the...

SKB Cases | 20" Deep 6U Roto Shock Rack | 3SKB-R06U20W The 3SKB-R06U20W Rolling Shockmount Case incorporates black powder coated twist latches with locking loops and a low profile injection molded pull handle with a 20 inch deep tough rotomolded shell. The molded design provides extra stiffness in the lids and sides and allows for secure stacking. Rack depth front to rear rail is 20 inches and each lid is 2-1/4 inches deep. Rack rails are pre-threaded for standard 10-32 hardware and the...

SKB Cases | 20" Deep 8U Roto Shock Rack | 3SKB-R08U20W The 3SKB-R08U20W Rolling Shockmount Case incorporates black powder coated twist latches with locking loops and a low profile injection molded pull handle with a 20 inch deep tough rotomolded shell. The molded design provides extra stiffness in the lids and sides and allows for secure stacking. Rack depth front to rear rail is 20 inches and each lid is 2-1/4 inches deep. Rack rails are pre-threaded for standard 10-32 hardware and the...

SKB Cases | 20" Deep 10U Roto Shock Rack | 3SKB-R10U20W The 3SKB-R10U20W Rolling Shockmount Case incorporates black powder coated twist latches with locking loops and a low profile injection molded pull handle with a 20 inch deep tough rotomolded shell. The molded design provides extra stiffness in the lids and sides and allows for secure stacking. Rack depth front to rear rail is 20 inches and each lid is 2-1/4 inches deep. Rack rails are pre-threaded for standard 10-32 hardware and the...

SKB Cases | 20" Deep 12U Roto Shock Rack | 3SKB-R12U20W The 3SKB-R12U20W Rolling Shockmount Case incorporates black powder coated twist latches with locking loops and a low profile injection molded pull handle with a 20 inch deep tough rotomolded shell. The molded design provides extra stiffness in the lids and sides and allows for secure stacking. Rack depth front to rear rail is 20 inches and each lid is 2-1/4 inches deep. Rack rails are pre-threaded for standard 10-32 hardware and the...

SKB Cases | 30" Deep 4U Roto Shock Rack | 3SKB-R904U30 The SKB 3SKB-R904U30 30" deep rotomolded shock rack should be an instant success with all companies utilizing the deeper servers such as the new Dell and Compaq. Nobody else manufactures a rotationally molded shock rack that is 30" deep and that fits inside the center portion of the case. This case has all of the same great features as the 24" deep Roto Shock Series. Standard features include: (patent pending) compound hinged doors, black...

SKB Cases | 30" Deep 6U Roto Shock Rack | 3SKB-R906U30 The SKB 3SKB-R906U30 30" deep rotomolded shock rack should be an instant success with all companies utilizing the deeper servers such as the new Dell and Compaq. Nobody else manufactures a rotationally molded shock rack that is 30" deep and that fits inside the center portion of the case. This case has all of the same great features as the 24" deep Roto Shock Series. Standard features include: (patent pending) compound hinged doors, black...

SKB Cases | 30" Deep 8U Roto Shock Rack | 3SKB-R908U30 The SKB 3SKB-R908U30 30" deep rotomolded shock rack should be an instant success with all companies utilizing the deeper servers such as the new Dell and Compaq. Nobody else manufactures a rotationally molded shock rack that is 30" deep and that fits inside the center portion of the case. This case has all of the same great features as the 24" deep Roto Shock Series. Standard features include: (patent pending) compound hinged doors, black...

SKB Cases | 30" Deep 10U Roto Shock Rack | 3SKB-R910U30 The SKB 3SKB-R910U30 30" deep rotomolded shock rack should be an instant success with all companies utilizing the deeper servers such as the new Dell and Compaq. Nobody else manufactures a rotationally molded shock rack that is 30" deep and that fits inside the center portion of the case. This case has all of the same great features as the 30" deep Roto Shock Series. Standard features include: (patent pending) compound hinged doors, black...

SKB Cases | 4U 28” Deep Shock Rack Mount Case | 3SKB-R904U28 The SKB 28” Heavy Duty Shock Rack systems from Cases2Go include a revolutionary new patented Adjustable Rail Conversion System (ARCS). This ARCS technology allows the user to adjust the rack width up to 0.5 inches on each side. Optional easy-mount adapter rails will convert the equipment mounting standard from 3/16" threaded to 7/32" through holes or square cage nut windows. The 7/32" through hole option and the 3/16" threaded are...